Classroom Technology in JAC 253 / Johnson Fine Arts Center 253

Richard LaHue
2020-09-14 00:34

All of the functions of the instructional technology (controlling the projector, screen, volume, etc.) in the room are controlled by the touch panel sitting on the instructor podium. The touch panel has four pages of functions.

This room supports projecting from the following sources:

  • Laptops via VGA
  • Laptops via HDMI
  • CDs, DVDs, & Blu-ray disks via Blu-ray player

Projecting HDMI Sources

  1. If the touch panel has fallen asleep, tap the touch screen to wake it up.
  2. Tap the Video Control button along the top.
  3. Tap the Laptop HDMI button.
  4. Make sure your computer is turned on and that you’re logged into your computer before plugging the HDMI cable into your laptop.
    • If you use an adapter to project to HDMI, FIRST plug the HDMI cable into your adapter, THEN plug the adapter into your computer.
  5. Tap the Audio Control button along the top of the touch screen, then tap Listen to Projector.
    • Use the + / - buttons to turn Video Volume up and down.
    • If the button with the x over the speaker is blue, then audio is muted. Tap that button to unmute it.
  6. When you’re done projecting, turn everything off! Tap the Power Controls button along the top of the touch screen, then tap the Shut Down System button.

Projecting VGA Sources

  1. If the touch panel has fallen asleep, tap the touch screen to wake it up.
  2. Tap the Video Control button along the top.
  3. Tap the Laptop VGA button.
  4. Make sure your computer is turned on and that you’re logged into your computer before plugging the VGA cable into your laptop.
    • If you use an adapter to project to VGA, FIRST plug the VGA cable into your adapter, THEN plug the adapter into your computer.
  5. Plug the VGA sound cable into your computer’s headphone jack to project sound.
  6. Tap the Audio Control button along the top of the touch screen, then tap Listen to Projector.
    • First use the volume up and down buttons on your computer, then use the + / - buttons to turn Video Volume up and down.
    • If the button with the x over the speaker is blue, then audio is muted. Tap that button to unmute it. Make sure your computer’s also not muted.
  7. When you’re done projecting, turn everything off! Tap the Power Controls button along the top of the touch screen, then tap the Shut Down System button.

Projecting a Bluray, DVD, or CD

  1. If the touch panel has fallen asleep, tap the touch screen to wake it up.
  2. Tap the Video Control button along the top.
  3. Tap the Laptop VGA button.
  4. Tap the Bluray button.
  5. Tap the Audio Control button along the top of the touch screen, then tap Listen to Bluray Player.
    • Use the + / - buttons to turn Video Volume up and down.
    • If the button with the x over the speaker is blue, then audio is muted. Tap that button to unmute it.
  6. Tap the Bluray Control button along the top of the touch screen.
  7. Tap the Eject button to open the Bluray player’s tray. Put your disk on the tray, then tap the Eject button again to close the Bluray player’s tray.
  8. Control the playback of your disk using the controls on the Bluray Control page.
  9. When you’re done projecting, turn everything off! Tap the Power Controls button along the top of the touch screen, then tap the Shut Down System button.

Leaving the projector running for extended periods while it's not in use significantly shortens the life of the projector. To turn off the projector, Tap the Power Controls button along the top of the touch screen, then tap the Shut Down System button.

For help with classroom technology, please email Media Services at av@carthage.edu or call (262) 551-5950.


Experiencing an issue? Restart the System

  1. Shut off what you can by going to Power Control > Shut Down System.
  2. Follow the bundle of cables running from the equipment rack to the wall.
  3. From that bundle of cables, identify the power cable plugged into the power outlets in the wall. Unplug it from the wall.
  4. Count to 20 seconds.
  5. Plug the power cable back into the wall.
  6. Wait for the touch panel to finish starting up, then try projecting again.
Tags: classroom technology, JAC, media
Average rating: 0 (0 Votes)

You cannot comment on this entry